HEDGEFOG RESEARCH INC. — National Aeronautics and Space Administration SBIR Phase I: Z13

Description

Hedgefog Research Inc. (HFR) proposes to develop new, thin-film, Bendable Electrodynamic Dust Shields (BEDS) that allow for continuous dynamic bending over compound curvatures such as the joint regions of a spacesuit, e.g., ankles, knees, elbows, etc. The BEDS technology is based on a combination of customized rigid and bendable plastic sheet forms with thin film electrode arrays fabricated from commercial flexible copper circuit.nbsp; The two-dimensional flat plastic sheets incorporate flexible lsquo;livingrsquo; hinges that can be bent in either a positive or negative radius to conform to curved surfaces. Using nylon or polypropylene plastic material and rapid prototyping techniques such as selective laser sintering (SLS), arbitrary plastic structures can be designed and fabricated that allow living hinges to bend and flex over 100,000rsquo;s of bending cycles. This creates a highly suitable support material for thin film electrode arrays that use high strength electric fields to remove dust from the surface. In Phase I, HFR will fabricate, assemble, and demonstrate the feasibility of the BEDS technology using high voltage waveforms and simulated regolith dust. We will also investigate high voltage safety techniques, electro-magnetic interference reduction, and adaptive technologies to switch on the active dust cleaning only when necessary. The active BEDS arrays will be combined with passive dust mitigation strategies for experimentation with new concepts of operation.