BUSEK CO., INC. — National Aeronautics and Space Administration SBIR Phase I: Z10
BUSEK CO., INC. — SBIR Phase I award from National Aeronautics and Space Administration.
- Amount
- $124,721
- Agency
- National Aeronautics and Space Administration
- Program / Phase
- SBIR · Phase I
- Topic
- Z10
- Solicitation
- SBIR_18_P1
- NAICS
- —
- Place of performance
- MA
- Period
- 2018-08-03 → 2019-02-15
Description
<p style="margin-left:0px; margin-right:0px">The magnetic topography in Hall effect thrusters (HETs) plays an important role in focusing the electrons and controlling the plasma discharge which in turns governs the thruster performance. The magnetic circuit components constitute more than half of the thruster mass. To produce low-mass thrusters, the design of the magnetic circuit needs to be optimized. The advanced magnetic alloy (AMA) is the material of choice for the ferromagnetic parts of an HET's magnetic circuit. In addition to its superior magnetic properties, the AMA is also thought to be compatible with reactive propellants such as iodine. Currently, traditional machining is employed to fabricate these ferromagnetic parts. This results in removal of nearly 80% of the expensive bulk material which then goes unused. Additionally, traditional machining can cause unwanted deformation on thin parts, reducing the production yield. In Phase I, Busek and Oak Ridge National Laboratory (ORNL) propose to study the feasibility of 3D printing AMA magnetic circuit components. Our team will consider suitable additive manufacturing (AM) processes, including ebeam/laser AM processes, and a binderjet process with suitable binders. We will evaluate test coupons printed by ORNL by measuring their relevant magnetic properties and comparing them to those made using traditional machining methods. Additionally, we will apply relevant heat treatments to 3D printed test coupons and then re-measure their magnetic properties. The results will be compared to those made using traditional machining methods that were subjected to identical heat treatments. Based on the Phase I results, the best AM process will be down-selected to print a magnetic circuit component for the Busek 200W HET, with the goal of integrating it into the thruster in a potential Phase II program.</p>