OMEGA OPTICS, INC. — National Aeronautics and Space Administration SBIR Phase I: S1

OMEGA OPTICS, INC. — SBIR Phase I award from National Aeronautics and Space Administration.

Amount
$122,580
Agency
National Aeronautics and Space Administration
Program / Phase
SBIR · Phase I
Topic
S1
Solicitation
SBIR_18_P1
NAICS
Place of performance
TX
Period
2018-07-27 → 2019-02-15

Description

<p><strong>In this proposal, Dr. Dalir from Omega Optics Inc. (OO), in collaboration with University of Texas (UT) at Austin and the George Washington University </strong>propose<strong> </strong>a novel 2D TCC-VCSEL arrays monolithically integrated with a surface-normal slow-light photonic crystal (PC) waveguide array that are vertically built in one lithography layer.&nbsp; Unlike conventional thinking where the waveguides in a photonic integrated circuit (PIC) are always built parallel to the substrate, which will require 64 lithographically defined waveguide layers to provide a 64&times;64 phase array. Due to the slow light effect, this system provides the required phase shift larger than liquid crystal with 30 &micro;m interaction length while maintaining the pixel (emitter) to pixel separation small enough to cover the total field of view (FOV) of 180?&times; 180?, and the instantaneous field of view of 0.05?.This will significantly increase the yield rate to the final targeted 98% since we have only one primarily defined lithography layer rather than a 64-layer approach without sacrificing the performance metrics. &nbsp;The steering of the laser beam can be realized through two different means: (1) electro-optically controlled through carrier perturbation or refilling the hole with EO polymer and (2) through thermal tuning which provides the needed phase shift of each element with the sweeping speed of &gt;100 KHz.&nbsp;The key claims are the following:<br /> 1. Engineering the PC waveguide slow light device where the group index perturbation &Delta;ng can be significantly increased to 170-200, which will provide a much shorter waveguide length needed to steer the beam.&nbsp;<br /> 2. The unequally spaced design is capable of providing the side-lobe suppression up to 35 and 50 dB, respectively as required in phase I and phase II. &nbsp;This achievement is due to the design of non-overlapping sidelobes and the unequally coupled optical intensity of each element created by each subarray while maintaining a single steerable peak with the required IFOV and TFOV.<br /> <br /> &nbsp;</p>