RADIABEAM SYSTEMS, LLC — Department of Energy STTR Phase II: 19f

Description

A major problem with nuclear fission reactors is the welding of components of dissimilar metals, where the filler is usually of an additional metal alloy that is not necessarily the same as the two parts to be joined. Welding of metals will often have a heat affected zone (HAZ) and a thermo- mechanically affected zone (TMAZ), which need to be post-weld heat treated to minimize precipitation or segregation. Electron beam-based additive manufacturing may realize mechanical, thermal, and radiation- management optimized materials and geometries without the usual complexity and expense of current fabrication techniques. RadiaBeam Systems in collaboration with the University of Texas at El Paso (UTEP) proposes to develop an electron beam-based additive manufacturing process for the joining of dissimilar metals for use in the nuclear power industry. Specifically this work proposes to optimized additive manufacturing parameters guided by thermodynamic simulations, as well as implement hardware improvements to efficiently process ferritic alloys of direct interest to the nuclear energy industry. Upon development, the proposed electron beam-based additive manufacturing process can be licensed to large volume manufacturers, for fabrication of small modular reactors (SMRs) components as well as other high-temperature energy conversion and combustion systems. The proposed technology can make the direct fabrication of reactor core components, as well as the repair of existing high value components in a variety of industry that currently rely on dissimilar metal welding. The method would offer a significant improvement to the cost of production and energy consumption compared with conventional joining-fabrication processes.