Faraday Technology, Inc. — Environmental Protection Agency SBIR Phase I: The proposed SBIR project addresses the need for robust, compact, sensitive, low cost sens

Description

The proposed SBIR project addresses the need for robust, compact, sensitive, low cost sensors for measurement of contaminants in water. The proposed innovation is the development and validation of an ion-selective microelectrode array, capable of simultaneous detection of multiple species in aqueous environments, with detection limits similar to or exceeding those available using standard laboratory-based instrumentation. The ion-selective microelectrode array embodies a polymer membrane film coupled with stripping voltammetry to enable detection of a wide range of cations and anions, without the need for a rotating electrode or mercury film. This technology builds on work by Prof. Amemiya of the University of Pittsburgh, a consultant to the program. The Phase I Objectives are to 1) show that the ion selective electrode concept can be incorporated onto a microelectrode for detection of perchlorate and lead, and show the potential to meet or exceed the detection limits obtained using laboratory based instrumentation, and 2) show that the microelectrode concept be extended to a microelectrode array leading to manufacturable, low cost robust sensors for commercial application. During Phase I, Faraday will provide a foundation for Phase II product and process development by demonstrating the feasibility of the ion selective microelectrode concept for in-line measurement of lead and perchlorate in water using single microelectrodes and provide comparison data between the detection limits for the ion selective microelectrodes and the ion selective rotating disc electrodes previously developed by Prof. Amemiya. As the single microelectrode concepts prove successful, Faraday will work with Prof. Amemiya and Water Analytics, Inc. to design microelectrode arrays, specifically with respect to scale-up and manufacturability. Phase II will concentrate on expanding the range of analytes detected, developing the commercialization activities. Optimization of the ion selective stripping voltammetry process will enable commercialization of a robust, rapid, inexpensive sensor array, in accordance with the EPA’s initiatives to promote development of novel water monitoring technologies, initially within the recently formed EPA Cincinnati/Dayton/Northern Kentucky water technology cluster, and subsequently throughout the United State. The potential commercial applications for the technology address three major markets: 1) drinking water, including desalination, 2) wastewater, including industrial and municipal, and 3) surface and groundwater monitoring. The market is conservatively estimated to be at least $500 million. An inexpensive and robust species analyzer is anticipated to rapidly infiltrate this market.