Nuclear Detonation Detection
SBIR topic from DOE, solicitation PPO-CWX-SB004. Open now. Closes 2026-12-16 (24 days left).
- Component (WERX)
- —
- Agency
- DOE
- Program / Phase
- SBIR
- Solicitation #
- PPO-CWX-SB004
- Topic #
- 25
- Status
- Open
- Pre-release date
- 2026-10-30
- Open date
- 2026-10-30
- Close date
- 2026-12-16 · 24 days until close · Add to calendar · See all deadlines
- Set-aside
- —
- NAICS
- —
Topic brief
Traditional agency SBIR topic from DOE. Win rates improve when you mirror the solicitation language, show adjacent past performance, and confirm you can meet the close date (2026-12-16).
Who this is for
- Firms with past performance in this agency or adjacent tech domain
- Teams that can evidence requirements line-by-line
- Companies ready to make a go/no-go within days, not weeks
Capture playbook
- Extract SHALL / must requirements (use SAM shred on the solicitation text)
- Map each requirement to proof points from past work
- Review related awards and named incumbents on this page
- Build a Go/No-Go pack and only write if the verdict is GO or MAYBE
- Track 25 on a pipeline board and set a deadline alert
pWin cues
- Keyword and technical overlap with prior agency awards
- Realistic cost and schedule vs median awards in this domain
- No mandatory set-aside or clearance gap you cannot meet
Watch-outs
- Bidding topics outside your evidenced domain to 'practice'
- Ignoring Phase I→II conversion rates in this agency
- Late start relative to close date
Related awards (competition context)
- omega-p r&d, Inc.
- RADIABEAM TECHNOLOGIES, LLC
- RADIABEAM SYSTEMS, LLC
- DIVERSIFIED TECHNOLOGIES, INC.
- CALABAZAS CREEK RESEARCH, INC.
Peer open topics
Topic brief FAQ
How do I research competition on this topic?
Use related awards and competitive intel on this page, plus awardee profiles linked from those awards.
What is a Go/No-Go pack?
A one-click decision pack combining competitive field, conversion signals, related awards, and (Pro) a verdict against your capability.
Where do I find more open topics like this?
Use component and agency filters on /opportunities, or the monthly open-topic digest.
Readiness scorecard Capability match Monthly open-topic digest All topic briefs
Past SBIR/STTR Winners in This Topic Area
Historical federal R&D awardees in adjacent agencies and technology domains — click any firm to inspect their award portfolio or match their capabilities.
-
High-power RF sources are one of the main sources of accelerator inefficiency. To increase efficiency, we propose to design in...
-
Reaching multi-TeV energies in future collider applications utilizing Radio Frequency (RF) accelerators of reasonable length...
+3 more past winners & teaming history in this topic area. Create a free account or enter your email below to unlock full incumbent history and topic alerts.
Go / No-Go decision pack
One-click pack: competitive field, conversion signal, related awards, and (Pro) a full GO / MAYBE / NO-GO verdict against your capability.
Open scorecard Free top-3 capability match
Pro unlocks full Go/No-Go verdicts and named incumbents. Compare plans
Incumbent detector & competitive field
Who already wins work like this, and how hard it is to advance — from 52+ prior awards on record.
Incumbents (preview)
Unlock named incumbents and repeat winners with full awardee links — upgrade to Pro or to start.
Description
The Office of Nuclear Detonation Detection within the National Nuclear Security Administration, Defense Nuclear Nonproliferation Research and Development office, develops novel technologies within two broad topics; underground nuclear explosion monitoring technologies that improve the precise timing and integration of multiple sensing modalities and support large-scale experimental campaigns that collect synchronized data from multiple locations; new technologies for radiation resistant microcircuits that improve current technology and develop materials and tools for radiation resistant applications. Applications are of interest in the following areas.
Areas of Interest
a. Integrated Data Acquisition System for Large-Scale Field Experiments: Data acquisition systems are a key component for any experiment [1,2]. They are the interface between researchers and the instrumentation deployed to record the experiment. In the case of large experiments, several distributed sensors may be operated independently, but the research team will want to ensure that they are all in good condition and record with accurate timing. This requires an integrated data acquisition system to coordinate the individual data acquisition systems for each sensor [3]. This coordination includes precise time synchronization, remote command and control, and data extraction and backup for a range of sensors, often deployed in challenging environments such as an underground tunnel complex. The Office of Nuclear Detonation Detection is soliciting research in integrated data acquisition systems useful in underground nuclear explosion monitoring applications, in which dynamic seismoacoustic and electromagnetic energy is propagated. Of interest are systems that would lead to fieldable nodes in rugged environments with practical size, weight, and power requirements and data transmission rates. Example system characteristics may include but are not limited to modular design with rapid communication between nodes, large data storage capacity with fast I/O, timing synchronization through cabled GNSS antenna, ability to interface with variety of deployed data acquisition systems, system-wide state of health tracking, and external communication for remote command and control.
b. Fieldable Calibration Tool for Nuclear Explosion Monitoring: The Office of Nuclear Detonation Detection is soliciting research in in-field sensor calibration approaches useful in underground nuclear explosion monitoring applications in which dynamic seismoacoustic and electromagnetic energy is propagated. Of interest are methods that would lead to quantified mapping from deployed sensors to metrological quantities with practical size, weight, and power for use in outdoor environments. The sensors of interest include seismometers, infrasound sensors (Nief et al., 2018), hydroacoustic sensors, and electromagnetic field sensors [4,5]. The primary standard calibration for these sensors is in a test laboratory during which as many factors as possible can be tightly controlled [6-9]. However, these calibrations cannot capture the full suite of factors that influence the instrument response when a sensor is fully deployed. This has motivated methods of calibration in the field, but running in-field calibrations is an uncommon procedure [10,11]. Example device characteristics may include, but are not limited to, the ability to interface with sensor and datalogger calibration pulse in volts, an amplitude calibration sensitivity (e.g. V/m/s, V/Pa, etc…) to within +/-5% precision, and operational temperature range from 0 to 40 °C.
c. Detonation Detection Systems: In addition to the specific subtopics listed above, applications in other areas relevant to this topic are invited. These include seismometer improvements (e.g., reduced size, improved sensitivity, reduced power requirements), seismic array improvements, infrasound sensor improvements, hydroacoustic sensor improvements, or other ways to detect acoustic energy underground, on the surface, or in the atmosphere at regional to global distances (>200km) [12-14]. Improvements should substantially enhance capabilities when compared to existing sensors or techniques.
d. Radiation Resistant Plastic Encapsulated Microcircuits with Undiminished Performance, High-Yield, and Lower Cost: Long duration space-based missions would greatly benefit from the availability of inexpensive and rapidly developed radiation resistant microcircuits. Plastic Encapsulated Microcircuits (PEM) are of keen interest in this regard for the new generation of proliferated spacecraft constellations being generated by commercial entities and the military. Of particular interest is the potential for PEMs to augment space qualified parts which are rare, expensive, have extraordinary lead times and quickly become obsolete with time. Most government agencies and commercial entities involved in spacecraft development understand that the need for faster, cheaper, and more abundant electronic parts is never going to diminish. Related questions are:
• Can PEMs meet the reliability requirements of space-based missions?
• Can they be screened?
• Do post-delivery tests and evaluations provide sufficient knowledge of the parts to satisfy mission requirements?
• Can PEMs be expected to last 15 years in space environments?
• What, if anything, can be done post -manufacturing to gain additional confidence in the suitability of PEMs parts for long term use in space? PEMs capable of high radiation resistance, undiminished performance, rapid development, and low-cost are the ultimate objectives of this research. The Office of Nuclear Detonation Detection is soliciting research to develop radiation resistant microcircuit plastic encapsulation methods capable of meeting the following specifications:
• Radiation survivability: up to 100krad total ionizing dose
• Minimizing Bremsstrahlung Effects
• Undiminished performance due to incident radiation
• Functional production yields > 80%
• Materials cost: 5-10 times lower than standard space qualified parts A Phase I research effort could identify the candidate materials and their potentials and demonstrate pathways for meeting radiation resistance and cost performance goals.
Source: DOE FY26 Phase I Topics Document (ConnectWerx) · Topic text last updated November 20, 2026
How to apply: DOE takes applications by pitch through the DOE SBIR/STTR Application Hub. Pitches are due 12/16 at 2 PM ET.
Official source: search topic 25 (solicitation PPO-CWX-SB004) on the agency's SBIR/STTR portal.
Check if your capability fits this topic
Loading teaming suggestions…
Post a teaming need for this topic. Enterprise posts go live immediately; free/Pro posts are moderated.
Pro+: starter abstract / approach / work plan / risks — outline only, not a full proposal.
Pro+: paste solicitation text or upload PDF/DOCX to extract SHALL/must requirements.
Turn this topic into a compliance checklist, evaluation criteria, and win themes.